How to Get Rid Of Mould and Damp from Your House?

cropped image of a professional with a spray bottle and a sponge

How to Get Rid Of Mould and Damp from Your House?

By : Georgia
Mould and damp is a common household problem, but should never overlook the problem. This is because mould not only diminishes the appearance of a room, but it is also a treat for your health. Studies have found that it can cause asthma, respiratory infections and allergies.

This is why people hire professional who perform end of lease cleaning in Perth. They have the experience, knowledge and tools to remove the mould and damp problem. However, with a little bit of guidance, you can also do it on your own. Here are some excellent ways to get rid of mould and damp from your house. Let’s have a look!

Main Cause of Damp and Mould in Your House

Before you try to remove the mould and damp from your house, it is essential that you understand the main cause of their existence. This is how you will be able to remove it and prevent future growth. Mould and damp is the result of excess moisture that is usually linked with ventilation issue or structural problems.

Dampness can be caused due to leaky pipes, excessive moisture in ground floor or basements, rain entering through crevices and other similar reasons. Experts believe that it can happen in a new house also if you construct it before the groundwater dry out properly. Getting rid of the dampness in your new house is not an easy thing to do. Thus, it is advisable to consult with the professionals before taking any action.

Mould is caused because of the build-up of condensation, which is formed when too much moisture is present in the air, and hot air touches a cold surface. Condensation can be caused by simple daily tasks such as showering, ironing, drying clothes indoors and cooking.

How to Get Rid Of Mould from Your House?

There are many commercial cleaners available in the market to remove mould from your house. However, you should opt for eco-friendly products because commercial products have harmful chemicals in it. These chemicals not only pollute the indoor air but also affect your health can be responsible for various respiratory issues. Thus try the following natural products that are safe and effective.

Hydrogen Peroxide

Hydrogen peroxide is antibacterial as well as antifungal. Thus, it is an excellent option to remove mould. Purchase a bottle of 3% concentration hydrogen peroxide from any nearby store in Perth. Pour it in a spray bottle and apply it on the affected spot. Keep for some time before scrubbing the area.

White Vinegar

White vinegar is also an excellent choice because it is effective, cheap and readily available. But make sure that that you don’t dilute it with water. Pour it in a spray bottle and apply on the spot. If you don’t have enough time for all these tasks or not sure about a specific method, contact professionals who perform end of lease cleaning in Perth. They know how to remove the mould effectively.

Baking Soda

If you want to clean the mould from your house effectively, then you can use Baking soda. Many professionals, who offer eco-friendly end of lease cleaning in Perth, use baking soda to get rid of mould. Take a spray bottle and fill it with warm water. Then add baking soda into it and mix it properly. Apply the solution on the mould and let it settle down. Once it is dry, use a scrubber to remove it.


Borax is easily available in any nearby local department store in Perth that has laundry supplies. Add around 1 cup of borax to 1 gallon of water in a bucket. Then stir the solution properly and mix the ingredients. Take a spray bottle and pour some solution into it. Finally, apply the solution to the affected area allow it to settle down. Then use a scrubber to remove it.

Tea Tree Oil

It is one of the most useful natural cleaners for mould because it is antibacterial and antifungal. Take some tea tree oil (1 teaspoon) and mix it with warm water (1 cup) into a bowl or a spray bottle.

Then, apply it directly onto the mould. It is advisable not to rinse the oil after you apply it because it will prevent the mould from coming back. Many professional, who carry our end of lease cleaning in Perth, use Tea Tree Oil for various cleaning purposes.

How to Get Rid Of Damp from Your House?

If you want to remove the damp from your house, you need to reduce the moisture level in your house and solve the structural problems. If required, take help from the professionals as they will be able to give you an effective and accurate complete house cleaning solution. However, you can follow these basic tips.

  • Improve the ventilation process in your home so that the fresh air can enter your home.
  • Hire professionals and repair the damaged pipes. This will protect the walls.
  • You should dry the walls after taking a shower. Use a clean and dry rag.
  • If the humidity level of your house is on the higher side, install a humidifier.
  • You should not dry your clothes inside the home.
  • An air conditioner can also absorb the moisture in a room but make sure that the filter is clean.


Moulds are not only ugly but also unhealthy. Thus you must remove the mould as soon as you noticed. Although the best way to tackle the issue is by hiring professionals who offer end of lease cleaning in Perth, you can also do it, But make sure to take all the necessary precautions and wear protective gear. The next time to clean the moulds, consider the ways as mentioned above.