How to Deep-Clean Your Bathroom Tiles?

Keeping a bathroom neat and germ-free is undoubtedly one of the toughest chores. From the hygiene and cleanliness perspective, you should deep clean your bathroom at least once a week. It is important to arrange all the necessary equipment and products to get rid of accumulated grime, grease, mould, mildew, soap scum, rust stains, calcium stains from each and every corner of your bathroom, especially grimy tiles. Achieving sparkling clean bathroom tiles needs proper tools, time and a bit of elbow grease. Make sure you know the time-saving tricks while removing stains, grease, mould and mildew from your bathroom walls and floors made of tiles. Since you can’t use abrasive or chemical-based cleaning products, we are sharing some great hacks that will help you deep clean your bathroom tiles with ease. In case you are moving out of your rental property, then contact the most experienced company for vacate cleaning in Perth. They will help you pass the inspection so that you can impress the landlord and get your bond back. If you are searching for DIY cleaning hacks for bathroom tiles, consider some tips and tricks shared below:

1. Clean Grouting in the Tiles

Do not forget to clean between the tiles while sprucing up your bathroom. Mouldy and grimy grout can make your tiles look nasty and can harbour tons of germs and disease. If you want the sparkling look of your bathroom tiles, make sure you clean the grout using effective cleaning products. Instead of using harsh chemicals, use a green or natural cleaning agent to avoid discolouration or damage. Apart from this, use an old toothbrush to get into the tight spaces while cleaning the grout of your bathroom tiles. For grout, prepare a less abrasive cleaning agent mixing a half cup baking soda, ¼ cup hydrogen peroxide and one teaspoon of dishwashing soap. Mix these ingredients well and apply it on the grimy grout. Let it rest for 5 to 10 minutes before scrubbing the surface with an old toothbrush. Rinse it with clean water. And repeat the process to achieve better outcomes. Quick Tip: Wipe off your bathroom tiles with a microfiber cloth to avoid streaks.

2. Deep Clean Your Wall Tiles

After bringing back the shine of your grout, it’s time to focus on your wall tiles. It is good to carry safe and sound cleaning products and tools. If you have ceramic tiles, use white vinegar to remove mould and tough stains. But never use vinegar on marble or other natural stone surfaces as it can damage or discolour your tiles or floors. For that, you can use specialised cleaner to remove stubborn stains from your marble surface Here is a complete guide on cleaning wall tiles of your bathroom:

• Pre-warm your grimy wall tiles by steaming up your bathroom.
• Apply the white vinegar and baking soda solution on ceramic wall tiles and leave it for 10 minutes
• Scrub the surface using a soft sponge.
• Keep scrubbing gently and rinse it off with clean water
• Repeat the process if needed

Mop the walls and let them dry using a towel or microfiber cloths. If you are preparing your rental premises for the final inspection, hire professionals for a thorough end of lease cleaning in Perth.

3. Sparkle Clean Your Floor Tiles

A steam cleaner will help you get rid of dirt, grime and grease from floor tiles of your bathroom. You can either hire a professional cleaner in Perth for steam cleaning your floor tiles. You can use a homemade cleaning agent to remove tough stains and mould from your floor tiles without damaging the surface. First, vacuum the surface using a heavy-duty vacuum cleaner before applying the liquid solvent. Let the floor to break down the stain before mopping the floor.

4. Clean From Top to Bottom

It is always good to clean your bathroom tiles from top to bottom. This will help clean every nook and cranny of the surface with perfection. Spray the solution and scrub from top to down. It will also help you save a lot of time and energy. This will boost the efficiency of your household cleaning session and help you get rid of grime and mould with ease.

5. Use Magic Eraser

Try magic eraser to get rid of tough stains, soap scum, mould, and mildew from your bathroom tiles. It works wonders in bringing back the lost shine of your tiles without even using harsh chemicals. The best part about magic eraser is that it works great on the smoother surfaces, such as tiles.

Conclusion

These are some great hacks that will help you deep clean bathroom tiles without even using harmful cleaning products that contain hazardous chemicals. You can also contact a reliable company for the best vacate cleaning in Perth to get the bond back without any rental dispute. They will clean everything from the kitchen to bathroom, living area to bedrooms according to the approved cleaning checklist.