
How to Clean Your Tile Floors Efficiently
Here is a step to step guide to manage the tile floors in your home.
Give the Floor a Sweep
Nothing beats a broom from getting to crevices and corners of the house. Sweep the floor thoroughly to remove the dust and debris from every edge of the walls and cabinets. Remove the dirt and lose build up using vacuum cleaner along the baseboards.
Adjust the vacuum to the appropriate setting and vacuum the floor tiles. This perfect combination of sweeping and vacuuming facilitates in removing most of the dirt and dust bunnies. Using a microfiber cloth to get rid of the dirt is also helpful.
Wipe Using Eco-Friendly Cleaner
Once the floor is cleared of surface dirt, try applying tile cleaning solutions:
- Vinegar and Water ( Mop the floor)
- Scouring Powder and Water (Spot-clean stains)
- Environment-friendly Cleaner and Water (Remove hard grease)
Prepare the cleaning solutions depending on the kind of tile you need to clean. Keep a soft brush ready to tackle stubborn stains. Make sure to fill water in another bucket to rinse the floor.
For ceramic tiles
Use manufacturer-recommended mild detergent. The use of abrasive products can scratch the flooring. Don’t use bleach or ammonia-based cleaners as they can discolour the tiles and spoil its texture.
For Stone Tiles
Follow the manufacturer’s instruction of using a soap-based product to clean the natural stone tiles. Avoid using abrasive products, and do not use vinegar, lemon juice or other acids on marble, travertine or limestone.
Mop the Floor Efficiently
The first time you use the solution to clean the floor, test it in a discreet spot to make sure it doesn’t harm the floor. Dip the string or chamois mop in the vinegar-water solution, wring it out as much as possible, and start carefully scrubbing the floor.
Start from one end of the room, and move backward. Make sure to replace the solution as you work your way across the room. If your microfiber pad gets dirty, switch it out for a new one. This process will prevent the casual gathering of dirt on the tiles and make them clean.
Also, make use of a soft brush to lift the stains. Once the floor looks clean, rinse it with hot water to prevent soap or detergent build-up. Let the floor air dry, and wipe it with a soft cloth to remove any remaining vinegar or castile soap, where ever necessary.
Don’t Forget to Clean the Grout
Grout locks the tiles tight, keep the water out, and provide a finished look to the tiled floor. However, it can absorb dirt, dust and grease with time, making it prone to soiling and staining. Keeping the grout clean is quite a challenge.
To deep clean, the grout, apply a baking soda paste and let it sit for a few minutes. Use a toothbrush to scrub it and rinse it with warm water. You can also use commercially prepared grout cleaner for a better result. Calling experts for Vacate Cleaning in Perth to restore the pristine condition of the floor tiles is a wise option.
Extra Protection
It is advisable to invest in rugs and mats to keep the floor tiles clean. Placing the mats at entry points, both inside the home and outside will pull and trap corrosive substances from shoes. Make sure to put protective pads under furniture to ensure an extra layer of protection to the floor.
Endnote
These cleaning tips for floor tiles are sure to keep your home look clean and neat. If you still find that the tile cleaning process takes more time than you have, it is wise to call the experts like Bond Cleaning in Perth to take over the job and restore the fundamental condition of the floor tiles.