When it comes to housekeeping, most people concentrate on the floor, countertops, and other similar surfaces. White walls are frequently overlooked because removing dirt and stains from the surface is time-consuming and a bit risky.
The surface of the walls can be easily damaged if you use harsh chemicals or inappropriate tools and methods. As a result, you must discover some methods for cleaning the walls safely.
Stains or dirty patches on the rental property’s walls can be a matter of conflict with the landlord. So, when the time comes to move, hire professionals who provide the best vacate cleaning Perth. The experts will spot clean the walls to help you get your bond money back. However, if you want to do it yourself but don’t know how, you’ll need the right knowledge.
Read on to know how to clean white walls.
Cleaning Latex Paint
If you have this type of paint on your walls, try the following steps:
Prepare the room for cleaning. Take down all artwork, pictures, and other items from a wall. Clear the area around the walls. For example, move furniture away from the walls. While dusting, cover your floor with a tarp to catch any dust or debris that falls.
Dust the walls. Take a broom and wrap it in a towel. Wipe the walls from top to bottom with your broom. Make an effort to reach into corners and remove cobwebs.
Warm water and a mild all-purpose cleaner are recommended. Always use a gentle cleaner. The lighter and cleaner the white walls, the better. Dip a sponge in warm water after mixing a small amount of your cleaner into it. Wipe dirt, debris, and fingerprints off the walls with the sponge.
Be cautious around power outlets. Before cleaning near outlets and phone jacks, wring out your sponge. Using too much water can be dangerous. Avoid cleaning too close to power outlets. If you need to scrub these outlets, turn off your circuit breaker first.
Clean your walls. After you’ve thoroughly cleaned your walls, empty your bucket. Clear water should be used to replace the dirty water. Fill a clean sponge halfway with water. To rinse the walls, swab them with clean water. Again, be cautious around electrical outlets. Cleaning walls is one of those cleaning tasks better left to the professionals.
Cleaning Oil-Based Paint
Oil-based paint is easier to wipe but you cannot take it for granted. Follow these steps to get the job done.
Prepare the room for cleaning. Remove any items that are hung on the wall, such as artwork and photographs. Move furniture away from the walls, such as desks and sofas. Place a tarp on the floor to catch any dirt or debris that falls while dusting the walls.
Clean the dust off your walls. Wrap a towel around the broom’s handle. Wipe down the walls from top to bottom with the broom. Pay close attention to the corners, which may have excess dust or cobwebs.
Make a detergent-vinegar solution. In a quart of warm water, dissolve a teaspoon of dish detergent. Then stir in a quarter cup of vinegar.
Use the vinegar mixture to clean your walls. Wipe your walls down with a rag or sponge. Gently wipe the walls to remove dirt, dust, grime, and fingerprints.
Degreaser should be used to target difficult areas. Degreaser can be purchased at a hardware or department store. This is used to remove tough stains from white walls, such as grease stains. These are frequently found in kitchens. To clean your white walls, use the degreaser as directed on the package.
Before cleaning around outlets, wring out your sponge. If the paint near the outlets is dirty, you may need to clean them. Before cleaning near outlets, wring out your sponge to remove the majority of the excess water. If any outlets require a thorough cleaning, turn off the circuit breaker.
Clean your walls. Fill a bucket halfway with clean water. Wipe down the walls with a clean sponge or rag dipped in water. Clear away any excess cleaner and residue. Continue wiping the walls until the water runs clear. It is one of the golden rules of cleaning by experts.
Maintaining Clean Walls
There are some very easy ways to maintain the cleanliness of your white walls.
Regularly dust your walls. Dust your walls every time you clean. You can use a broom and a towel to clean your walls, or you can lightly vacuum them with your vacuum’s detachable broom brush. White walls can be kept clean by dusting them on a regular basis. To get the best result, contact trained cleaners who offer professional vacate cleaning Perth.
Keep moisture away from your walls. Moisture can make your walls dirty or even mouldy. White walls in areas such as the kitchen or bathroom require additional moisture protection. After showering, always wipe down the walls. Purchase a water repellent from a local department store and apply it to the walls.
Smudges can be removed with plain water as they appear. Remove smudges from walls as soon as they appear with a small amount of warm water. If you target sponges quickly, they should be easy to remove. Make a habit of wiping away smudges as soon as you notice them to keep dirt and grime from accumulating on your walls.
Even if this is your first time removing dirt and stains from white walls, it does not have to be a difficult task. All you have to do is follow the steps outlined above. Contact professionals who provide reliable vacate cleaning in Perth if you want to avoid the stress and hassle of cleaning the walls and other surfaces. They have the ability to make your walls appear spotless.