Floors made up of natural stones, such as marble or granite can enhance the overall look and feel of your abode. However, you need to take extra care on a regular basis if you want to keep your natural stone floors shiny and glossy.
Despite being strong, marbles and granite surfaces are extremely porous and can be damaged easily. It is important to follow the instructions of manufacturers while sprucing up these surfaces.
If you are preparing the entire rented property for the final inspection, prefer hiring trained professionals for an unbeatable vacate cleaning in Perth. They know how to remove dust, dirt and stains from all types of surfaces, including natural stone floors.
In case you are looking for DIY cleaning tips for your delicate marble and granite floors, keep on reading the article.
Here we have got some pro hacks that will make it easy for you to restore the shine of your natural stone surfaces without causing any damage.
Things to Remember: Do’s and Don’ts
Always remember that natural stone surfaces are very delicate, so avoid using the alkaline or acidic based cleaner. Both can ruin the natural shine and finish from the floor. Instead, use a neutral cleaner while treating tough stains. A pH of 7 is considered as a neutral.
Anything below 7 is acidic, which can damage the sealant of your natural stone. And above 7 is alkaline, which can leave residue marks if not properly washed. Here are some do’s and don’ts that you need to keep in mind while sprucing up your granite or marble floors:
- Don’t use white vinegar, lemon juice and other cleaning products that contain acids when removing stains from marble, granite, travertine and other natural stone surfaces.
- Do not use abrasive cleaning tools, such as scrubbers, steel wool, scrub pads and scrapers. These can leave scratches behind.
- Don’t use ammonia-based products as they will damage the finish of your floor.
- Do use microfiber mops for safe and sound cleaning.
- Do use a sealant on your natural stone surfaces.
- Use mats to prevent the dirt and dust from building up on the surface.
Cleaning Supplies You will Need
Wisely choose the cleaning agent for your marble and granite floors because it should have a neutral pH value. So, here is a complete list that you will need to arrange before getting into the cleaning process:
- Neutral pH dishwashing soap or all-purpose cleaner
- Vacuum cleaning machine with rotating brush deactivated /broom
- Water
- Microfiber mop, microfiber towels and cloth.
- Bucket
If you are concerned about your delicate and beautiful floors, hire professional cleaners in Perth. They will give restore the look and shine of your natural stones while removing tough stains and grime.
Tips to Clean Your Marble or Granite Floors
Regular maintenance is vital if you want to keep your natural stone floors look new all year round. Accumulated dust, sand and grit can damage your granite or marble floors. So, make sure you mop the surfaces regularly to achieve sparkling clean results. Here are simple and easy cleaning steps that will make your life easier:
1. Remove Dry or Loose Dust and Debris
From dust particles to pet fur, pollens to grime, all can damage your natural stone floor. You can get rid of everything if you regularly sweep or vacuum the surface.
Use a vacuum cleaner to clean the floor. Make sure you run the machine in the circular motion to keep them looking clean and shiny all day long.
2. Get Rid of Tough Stains
Removing stubborn stains from marble and granite floors require a bit of elbow grease and, of course, the right product. First, fill a bucket with warm water and mix a three tablespoon of Neutral dish soap or all-purpose cleaner.
Dip the microfiber mop in the solution and wipe your floor. Make sure you pay special attention to stained areas if you want to achieve the best possible results.
If you are at the end of your tenancy, hire trained vacate cleaners in Perth. They will take care of your specific cleaning needs and give you the best quality of service at the best price.
3. Wash it Properly
Begin at the outermost corner of the room and wash towards the room exit if you want to wash your floors properly. Rinse with clean water to prevent the soap residue.
4. Dry the Surface
Open the windows, switch on the ceiling fan to let the floor air dry completely. This is an important step if you are cleaning natural stone floors.
Conclusion
The products and methods mentioned above in the article are safe and reliable. You can easily clean natural stone floors like a pro. In case you are moving out of the leased property, hire an experienced company for a thorough vacate cleaning in Perth and secure your bond money.
