When you move out of a rental property, one of the important things that you need to do is cleaning the property thoroughly. From the walls to cabinets and kitchen to bathrooms, every corner of the property should be perfectly clean.
However, performing the task can be extremely challenging. When you relocate, you have to juggle with various moving responsibilities, and that can be very stressful. At this point of time, the last thing you would want is to clean the entire house.
However, the task is essential to get back your bond money. If you want to get the job done in a hassle-free manner, hire professionals who perform the
best vacate cleaning in Perth. They will give you excellent result and let you focus on other essential things. In case you are moving on a tight budget and want to perform the task yourself, make sure you follow the right procedure.
Read on to know more about the step by step process to execute your end of lease cleaning.
Step1: Choose Between DIY methods and Professionals
To carry out the task perfectly, first, you need to decide whether you can perform the task on your own or you need the help of professionals. Always read the lease agreement properly because landlords usually mention in the agreement if they want professional cleaning or not.
You should not opt for a DIY approach until you are sure that you would be able to accomplish the task perfectly. Do not forget that the refund of the security deposit depends on the standard of the cleaning. If you are doing it yourself, you need to do a lot of preparations.
Step 2: Get Prepared
Before you get started, you must spend some time in the preparations. The better you will be prepared, the easier it will be to execute the task. So make sure that you have all the essential cleaning supplies like sponges, rags, paper towel, stain remover, magic eraser, rubber gloves and so on.
If you do not have a vacuum cleaner, purchase it or rent it from any nearby hardware shop in Perth. You should also prepare a cleaning checklist to make sure that you wipe and scrub every nook and corner of the rental property. You can prepare a list or get it directly from a website.
Step 3: Focus On Areas That Matter the Most
First, you should focus on those areas that require your maximum attention. If there are any major damages like pipe leakages, clogged drain, broken window glass, light fittings or something else, repair it or replace it.
Clean the spots that landlords carefully examine such as oven, windows, and walls. Remove the grease and kitchen oil from the inner surface of the oven and erase all marks from your walls.
Step 4: Start With Kitchen
Always start your end of lease cleaning from your kitchen because it acts as a magnet for dirt, grease, kitchen oil, stains, spills, etc. It will require some patience and a lot of elbow grease to clean this place. Moreover, there are different surfaces to clean. So, it will consume your maximum amount of time. You don’t want to leave for the last moment and clean it in a hustle.
· Remove cobwebs and wipe the light fittings
· Clean the outside and inside of the cabinets and drawers.
· Wipe down all the appliances thoroughly.
· Remove dirt from countertop, tiles and stovetop.
· Wipe the light switch and finally the floor.
Step 5: Clean Bathroom
Once you are done with the kitchen, it is time to clean the bathroom. It is another room that accumulates a lot of dirt and needs a lot of scrubbing. If you are not comfortable to clean a dirty bathroom or want to save your time, you can opt for a company that offers reliable vacate cleaning in Perth.
The professionals scrub and rinse every spot in the bathroom and make it look sparkling clean. However, if you are cleaning on your own, make sure that you focus on the following spots.
· Remove stains and rings from the toilet.
· Scrub and wash the bathtub, sink and faucets.
· Remove soap scum from shower glass and descale the showerhead.
· Remove the cobwebs and mildews from the bathroom tiles.
Step 6: Clean Other Rooms
You should also get rid of the dust and dirt from your living room, bedroom and any additional rooms. You do not expect these rooms to be as dirty as your kitchen or bathroom, but you need to make sure that it looks perfectly clean. The living room is the first place that your landlord will notice so you would like to start the inspection on a positive note.
· Remove cobwebs, wipe the ceiling fans and light fittings.
· Clean all the furniture and wardrobe from outside and inside.
· Remove dirt and dust from the window glass, sills and blinds.
· Dust the walls and baseboard, doors and handles, switches, etc.
· Vacuum the upholstery and sweep the floors before mopping them.
Step 7: Clean Carpets at the End
Substandard cleaning of carpet is one of the most common reasons for
disputes between tenants and landlords at the end of the lease period. So, make sure it is perfectly clean.
You should always vacuum the carpets at the end of the entire process. If you vacuum it at the start, then it is most likely to get dirty again due to the dusting of the entire house. Ideally, you should clean it one day before the final inspection.
The Bottom Line
If you follow the 7 steps mentioned above, you would be able to perform the task in an organised manner. However, it is always challenging to
clean a rental property because you also need to focus on other aspects of moving. So, if you don’t want to take any chances with your bond money, hire experienced vacate cleaners in Perth.
